Part Number Hot Search : 
MPSW14 1A105 JE13005 2A222 28C011T D221K BCR108L3 L4005
Product Description
Full Text Search
 

To Download CCRS-53S3O-M Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  ? 2013 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccrs-53s/crs-53s page 1 ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches electrical characteristics form factor 2p3t, break before make frequency range ccrs-53s crs-53s dc?26.5 ghz dc?26.5 ghz characteristic impedance 50 ohms operate time 10 ms (max.) release time 10 ms (max.) actuation voltage available 12 15 24 28 v actuation current, max. @ ambient 420 350 280 200 ma environmental and physical characteristics operating temperature commercial model, ccrs-53s elite model, crs-53s ?40c to 65c ?55c to 85c vibration (mil-std-202 method 214, condition d, non-operating) 10 g?s rms shock (mil-std-202 method 213, condition d, non-operating) 500 g?s standard actuator life actuator life w/ additional features 5,000,000 cycles 1,000,000 cycles connector type sma humidity (moisture seal) available weight 2.65 oz. (75.1g) (max.) performance characteristics frequency dc?6 ghz 6?12 ghz 12?18 ghz 18?22 ghz 22?26.5 ghz insertion loss, db, max. 0.1 0.2 0.3 0.5 0.6 isolation, db, min. 85 80 75 70 55 vswr , max. 1.1:1 1.2:1 1.3:1 1.4:1 1.5:1 part numbering system connector s: sma female actuator voltage 1: 28 vdc failsafe 2: 15 vdc failsafe 3: 12 vdc failsafe 4: 24 vdc failsafe actuator type 0: standard contacts c: indicator contacts **see parts list on page 8 options t: ttl drivers with diodes d: transient suppression diodes m: moisture seal s: 9 pin d-sub connector actuator voltage ccrs-53 s 1 c - t ** series connectors actuator type options for other options, contact factory. part number description ccrs-53s commercial failsafe 2p3t, dc-26.5ghz crs-53s elite failsafe 2p3t, dc-26.5ghz the ccrs-53s/crs-53s is a broadband, 2p3t, electromechanical coaxial switch designed to switch a microwave signal from a common input to either of two outputs. the characteristic impedance is 50 ohms. the switches are small with the minimum spacing that is compatible with sma connectors, and can also be used as a spdt switch with external terminations.
ccrs-53s/crs-53s page 2 specifications are subject to change without notice ? 2013 teledyne coax switches ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches schematics and mechanical outline 9 pin d-sub pinout for failsafe 2p3t options pin no. basic indicators ttl indicators & ttl 1+ + 2- - 3 common common 411 5 6vswvsw 7a a 8b b 9c c 1 6 ?- s option ? 9 - pin d - sub connector ( example : ccrs -53 s 10- s ) truth table (with ttl option) logic input rf path indicator (if applicable) 1 0 2&3 4&5 b & c 1 1&2 3&4 a & c h = 1.75 std & indicator model h = 1.90 all other models 2x solder terminals solder wire maximum temp 250oc for no more than 5 sec ttl indicators analog
? 2013 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccrs-53s/crs-53s page 3 ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches typical narrowband rf insertion loss performance curves rf notes -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 0123456 insertion loss (db) frequency (ghz) insertion loss ( dc-6 ghz ) -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 6789101112 insertion loss (db) frequency (ghz) insertion loss ( 6-12 ghz ) -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 12 13 14 15 16 17 18 insertion loss (db) frequency (ghz) insertion loss ( 12-18 ghz ) -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 18 19 20 21 22 insertion loss (db) frequency (ghz) insertion loss ( 18-22 ghz ) -1.0 -0.9 -0.8 -0.7 -0.6 -0.5 -0.4 -0.3 -0.2 -0.1 0.0 22 23 24 25 26 insertion loss (db) frequency (ghz) insertion loss ( 22-26.5 ghz )
ccrs-53s/crs-53s page 4 specifications are subject to change without notice ? 2013 teledyne coax switches ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches typical narrowband rf isolation performance curves rf notes -140 -120 -100 -80 -60 -40 -20 0 0123456 isolation (db) frequency (ghz) isolation ( dc-6 ghz ) -140 -120 -100 -80 -60 -40 -20 0 6 7 8 9 10 11 12 isolation (db) frequency (ghz) isolation ( 6-12 ghz ) -140 -120 -100 -80 -60 -40 -20 0 12 13 14 15 16 17 18 isolation (db) frequency (ghz) isolation ( 12-18 ghz ) -140 -120 -100 -80 -60 -40 -20 0 18 18.5 19 19.5 20 20.5 21 21.5 22 isolation (db) frequency (ghz) isolation ( 18-22 ghz ) -140 -120 -100 -80 -60 -40 -20 0 22 22.5 23 23.5 24 24.5 25 25.5 26 26.5 isolation (db) frequency (ghz) isolation ( 22-26.5 ghz )
? 2013 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccrs-53s/crs-53s page 5 ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches typical narrowband rf vswr performance curves rf notes 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 0123456 vswr frequency (ghz) vswr ( dc-6 ghz ) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 6789101112 vswr frequency (ghz) vswr ( 6-12 ghz ) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 12 13 14 15 16 17 18 vswr frequency (ghz) vswr ( 12-18 ghz ) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 18 18.5 19 19.5 20 20.5 21 21.5 22 vswr frequency (ghz) vswr ( 18-22 ghz ) 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2.0 22 22.5 23 23.5 24 24.5 25 25.5 26 26.5 vswr frequency (ghz) vswr ( 22-26.5 ghz )
ccrs-53s/crs-53s page 6 specifications are subject to change without notice ? 2013 teledyne coax switches ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches power handling vs. frequency estimates based on the following reference conditions: ? ambient temperature of 40c or less ? sea level operation ? load vswr of 1.20:1 maximum ? no high-power (hot) switching please contact teledyne coax switches for derating factors when applications do not meet the foregoing reference conditions. typical power performance curve 3000 power (w) frequency ghz 2000 1000 800 600 400 300 200 100 80 60 40 30 20 10 .1 .2 .3 .4 .6 .8 1 2 4 6 8 10 18 26.5 standard sma switches
? 2013 teledyne relays (800) 284-7007 ? www.teledynecoax.com ccrs-53s/crs-53s page 7 ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches actuator an actuator is the electromechanical mechanism that transfers the rf contacts from one position to another upon dc command. arc suppression diode a diode is connected in parallel with the coil. this diode limits the ?reverse emf spike? generated when the coil de- energizes to 0.7 volts. the diode cathode is connected to the positive side of the coil and the anode is connected to the negative side. date code all switches are marked with either a unique serial number or a date code. date codes are in accordance with mil- std-1285 paragraph 5.2.5 and consist of four digits. the rst two digits de ne the year and the last two digits de ne the week of the year (yyww). thus, 1032 identi es switches that passed through nal inspection during the 32nd week of 2010. failsafe a failsafe switch reverts to the default or failsafe position when actuating voltage is removed. this is realized by a retur n spr ing within the dr ive mechanism. this t ype of switch requires the continuous application of operating voltage to select and hold any position. (multi-position switches are normally open with no voltage applied). indicator indicators tell the system which position the switch is in. other names for indicators are telemetry contacts or tellback circuit. indicators are usually a set of internally mounted dc contacts linked to the actuator. they can be wired to digital input lines, status lights, or interlocks. unless otherwise speci ed, the maximum indicator contact rating is 30 vdc, 50 ma, or 1.5 watts into a resistive load. isolation isolation is the measure of the power level at the output connector of an unconnected rf channel as referenced to the power at the input connector. it is speci ed in db below the input power level. switching time switching time is the total interval beginning with the arrival of the leading edge of the command pulse at the switch dc input and ending with the completion of the switch transfer, including contact bounce. it consists of three parts: (1) inductive delay in the coil, (2) transfer time of the physical movement of the contacts, and (3) the bounce time of the rf contacts. ttl switch driver option as a special option, switch drivers can be provided for both failsafe and latching switches, which are compatible with industry-standard low-power schottky ttl circuits. performance parameters vs frequency generally speaking, the rf performance of coaxial switches is frequency dependent. with increasing frequency, vswr and insertion loss increase while isolation decreases. all data sheets specify these three parameters as ?worst case? at the highest operating frequency. if the switch is to be used over a narrow frequency band, better performance can be achieved. actuator current vs temperature the resistance of the actuator coil varies as a function of temperature. there is an inverse relationship between the operating temperature of the switch and the actuator drive current. for switches operating at 28 vdc, the approximate actuator drive current at temperature, t, can be calculated using the equation: magnetic sensitivity an electro-mechanical switch can be sensitive to ferrous materials and external magnetic elds. neighboring ferrous materials should be permitted no closer than 0.5 inches and adjacent external magnetic elds should be limited to a ux density of less than 5 gauss. glossary i a [1 + .00385 (t-20)] where: i t = actuator current at temperature, t i a = room temperature actuator current C see data sheet t = temperature of interest in c i t =
ccrs-53s/crs-53s page 8 specifications are subject to change without notice ? 2013 teledyne coax switches ccrs-53s\crs-53s\082013\q3 series ccrs-53s/crs-53s miniature dc?26.5 ghz failsafe 2p3t coaxial switch coax switches failsafe ccrs-53s/crs-53s part number list * x = 1 (28vdc), 2 (15vdc), 3 (12vdc) and 4 (24vdc) p art n o .p art n o . 1 ccrs-53sxc 43 crs-53sx0-ms 2 ccrs-53sxc-d 44 crs-53sx0-s 3 ccrs-53sxc-dm 45 crs-53sx0-t 4 ccrs-53sxc-dms 46 crs-53sx0-tm 5 ccrs-53sxc-ds 47 crs-53sx0-tms 6 ccrs-53sxc-m 48 crs-53sx0-ts 7 ccrs-53sxc-ms 8 ccrs-53sxc-s 9 ccrs-53sxc-t 10 ccrs-53sxc-tm 11 ccrs-53sxc-tms 12 ccrs-53sxc-ts 13 ccrs-53sx0 14 ccrs-53sx0-d 15 ccrs-53sx0-dm 16 ccrs-53sx0-dms 17 ccrs-53sx0-ds 18 ccrs-53sx0-m 19 ccrs-53sx0-ms 20 ccrs-53sx0-s 21 ccrs-53sx0-t 22 ccrs-53sx0-tm 23 ccrs-53sx0-tms 24 ccrs-53sx0-ts 25 crs-53sxc 26 crs-53sxc-d 27 crs-53sxc-dm 28 crs-53sxc-dms 29 crs-53sxc-ds 30 crs-53sxc-m 31 crs-53sxc-ms 32 crs-53sxc-s 33 crs-53sxc-t 34 crs-53sxc-tm 35 crs-53sxc-tms 36 crs-53sxc-ts 37 crs-53sx0 38 crs-53sx0-d 39 crs-53sx0-dm 40 crs-53sx0-dms 41 crs-53sx0-ds 42 crs-53sx0-m


▲Up To Search▲   

 
Price & Availability of CCRS-53S3O-M

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X